Table of Contents
Advertisement
monitor source cpu
Description
Mirror Interface traffic
Syntax
monitor source { cpu [ <cpu_switch_range> ] } } { both | rx | tx }
Name
both
Parameters
rx
tx
speed
Configures interface speed. If you use 10, 100, or 1000 keywords with
Description
the auto keyword the port will only advertise the specified speeds.
Syntax
speed { 10g | 2500 | 1000 | 100 | 10 | auto { [ 10 ] [ 100 ] [ 1000 ] } }
Name
1000
100
10
Parameters
auto
[ 10 ]
[ 10 0]
[ 1000 ]
tacacs-server host
Description
Configure TACACS+ server
tacacs-server host <word1-255> [ port <0-65535> ] [
Syntax
timeout <1-1000> ] [ key <line1-63> ]
Name
word1-255
Parameters
0-65535
1-1000
line1-63
RocketLinx MP1204-XT User Guide: 2000644 Rev. A
Description
Setting source port to both will mirror both ingress and egress traffic
Setting source port to rx will mirror ingress traffic
Setting source port to tx will mirror egress traffic
Description
1Gbps
100Mbps
10Mbps
Auto negotiation
10Mbps
100Mbps
1Gbps
Description
Hostname or IP address
TCP port number
Wait time in seconds
The shared key
Configure Mode Commands
Command Line Interface (CLI) - 321
Advertisement
Table of Contents
