Table of Contents
Advertisement
Configuration | PoE Menus
The following pages are under the PoE sub-menu.
•
PoE | PoE
on Page 139
•
PoE | Power Scheduler
•
PoE | Power Reset
PoE | PoE
This page allows you to inspect and configure the current PoE port settings.
Item
Reserved Power determined by
In this mode, you can allocate the amount of power that each port may reserve. The
Allocated mode
allocated/reserved power for each port/PD is specified in the Maximum Power fields.
In Class mode, each port automatically determines how much power to reserve
according to the class the connected PD belongs to, and reserves the power
Class mode
accordingly. Four different port classes exist and one for 4, 7, 15.4 or 30 Watts.
In Class mode the Maximum Power fields have no effect.
This LLDP-MED mode is similar to the Class mode expect that each port determine
the amount power it reserves by exchanging PoE information using the LLDP
LLDP-MED
protocol and reserves power accordingly. If no LLDP information is available for a
mode
port, the port reserves power using the Class mode
In LLDP-MED mode the Maximum Power fields have no effect.
RocketLinx MP1204-XT User Guide: 2000644 Rev. A
on Page 141
on Page 142
Configuration | PoE | PoE
Configuration | PoE Menus
Configuration Pages - 139
Advertisement
Table of Contents
