Table of Contents
Advertisement
LLDP | LLDP-MED Neighbors
Item
4. Guest Voice Signaling - for use in network topologies that require a different policy for
the guest voice signaling than for the guest voice media.
5. Softphone Voice - for use by softphone applications on typical data centric devices, such
as PCs or laptops.
6. Video Conferencing - for use by dedicated Video Conferencing equipment and other
Application
similar appliances supporting real-time interactive video/audio services.
Type
7. Streaming Video - for use by broadcast or multicast based video content distribution
(Continued)
and other similar applications supporting streaming video services that require specific
network policy treatment. Video applications relying on TCP with buffering would not
be an intended use of this application type.
8. Video Signaling - for use in network topologies that require a separate policy for the
video signaling than for the video media.
Policy indicates that an Endpoint Device wants to explicitly advertise that the policy is
required by the device. Can be either Defined or Unknown
Policy
•
Unknown: The network policy for the specified application type is currently unknown.
•
Defined: The network policy is defined.
TAG is indicative of whether the specified application type is using a tagged or an untagged
VLAN. Can be Tagged or Untagged.
TAG
•
Untagged: The device is using an untagged frame format and as such does not include a
tag header as defined by IEEE 802.1Q-2003.
•
Tagged: The device is using the IEEE 802.1Q tagged frame format.
VLAN ID is the VLAN identifier (VID) for the port as defined in IEEE 802.1Q-2003. A
value of 1 through 4094 is used to define a valid VLAN ID. A value of 0 (Priority Tagged) is
VLAN ID
used if the device is using priority tagged frames as defined by IEEE 802.1Q-2003, meaning
that only the IEEE 802.1D priority level is significant and the default PVID of the ingress
port is used instead.
Priority is the Layer 2 priority to be used for the specified application type. One of the eight
Priority
priority levels (0 through 7).
DSCP is the DSCP value to be used to provide Diffserv node behavior for the specified
DSCP
application type as defined in IETF RFC 2474. Contain one of 64 code point values (0
through 63).
Auto-
Auto-negotiation identifies if MAC/PHY auto-negotiation is supported by the link partner.
negotiation
Auto-negotiation status identifies if auto-negotiation is currently enabled at the link
Auto-
partner. If Auto-negotiation is supported and Auto-negotiation status is disabled, the 802.3
negotiation
PMD operating mode is determined the operational MAU type field value rather than by
status
auto-negotiation.
Auto-
negotiation
Auto-negotiation Capabilities shows the link partners MAC/PHY capabilities.
Capabilities
240 - Monitor Pages
Monitor | LLDP | LLDP-MED Neighbors (Continued)
RocketLinx MP1204-XT User Guide: 2000644 Rev. A
Advertisement
Table of Contents
