GVRP Configure Commands
This subsection contains GVRP Configure commands.
gvrp
Description
Enable GVRP on port(s)
Syntax
gvrp
Parameter
None
gvrpjoin request vlan
Description
Emit a Join-Request for test purpose
Syntax
gvrp join-request vlan<vlan_list>
Name
Parameter
vlan_list
gvrpleave request vlan
Description
Emit a leave-Request for test purpose
Syntax
gvrp leave-request vlan<vlan_list>
Name
Parameter
vlan_list
gvrp max-vlans
Description
gvrpmaximum number of VLANs
Syntax
gvrp max-vlans<1-4095>
Name
Parameter
<1-4095>
RocketLinx MP1204-XT User Guide: 2000644 Rev. A
Description
List of VLANs
Description
List of VLANs
Description
A valid range is from 1-4095.
GVRP Configure Commands
Command Line Interface (CLI) - 377