Ringv2 Group Mode Commands; Ringv2 Protect; Guard-Time; Mode - Comtrol RocketLinx MP1204-XT User Manual

RingV2 Group Mode Commands

RingV2 Group Mode Commands
This subsection contains RingV2 Group mode commands.

ringv2 protect

Description To configure ring protection.
Syntax ring protect
Name
group1
Parameters
group2
group3

guard-time

Description Set guard time
Syntax guard-time { <ringGuardTimerDef> }
Name
Parameter
ringGuardTimerDef

mode

Description Enable/Disable ring group
Syntax mode { disable | enable }
Name
Parameters disable
enable
node1 interface GigabitEthernet <portNo>}
Description Set interface of ring protection node
Syntax node1 interface GigabitEthernet <portNo>
Name
Parameter
<portNo>
334 - Command Line Interface (CLI)
Description
Configure ring protection v2 group1 (Ring)
Configure ring protection v2 group2 (Ring)
Configure ring protection v2 group3 (Chain)
Description
<10-3600>, unit: second. Default is 10 seconds
Description
Set the specified Ring group to Disabled
Set the specified Ring group to Enabled
Description
Valid values: 1~max port index.
RocketLinx MP1204-XT User Guide: 2000644 Rev. A