Table of Contents
Advertisement
Item
TCP/UDP
When Specific is selected for the TCP/UDP destination filter, you can enter a specific TCP/
Destination
UDP destination value. The allowed range is 0 to 65535. A frame that hits this ACE
Number
matches this TCP/UDP destination value.
TCP/UDP
When Range is selected for the TCP/UDP destination filter, you can enter a specific TCP/
Destination
UDP destination range value. The allowed range is 0 to 65535. A frame that hits this ACE
Range
matches this TCP/UDP destination value.
Specify the TCP No more data from sender (FIN) value for this ACE.
•
0: TCP frames where the FIN field is set must not be able to match this entry.
TCP FIN
•
1: TCP frames where the FIN field is set must be able to match this entry.
•
Any: Any value is allowed (don't-care).
Specify the TCP Synchronize sequence numbers (SYN) value for this ACE.
•
0: TCP frames where the SYN field is set must not be able to match this entry.
TCP SYN
•
1: TCP frames where the SYN field is set must be able to match this entry.
•
Any: Any value is allowed (don't-care).
Specify the TCP Reset the connection (RST) value for this ACE.
•
0: TCP frames where the RST field is set must not be able to match this entry.
TCP RST
•
1: TCP frames where the RST field is set must be able to match this entry.
•
Any: Any value is allowed (don't-care).
Specify the TCP Push Function (PSH) value for this ACE.
•
0: TCP frames where the PSH field is set must not be able to match this entry.
TCP PSH
•
1: TCP frames where the PSH field is set must be able to match this entry.
•
Any: Any value is allowed (don't-care).
Specify the TCP Acknowledgment field significant (ACK) value for this ACE.
•
0: TCP frames where the ACK field is set must not be able to match this entry.
TCP ACK
•
1: TCP frames where the ACK field is set must be able to match this entry.
•
Any: Any value is allowed (don't-care).
Specify the TCP Urgent Pointer field significant (URG) value for this ACE.
•
0: TCP frames where the URG field is set must not be able to match this entry.
TCP URG
•
1: TCP frames where the URG field is set must be able to match this entry.
•
Any: Any value is allowed (don't-care).
Ethernet Type Parameters
Specify the Ethernet type filter for this ACE.
EtherType
•
Any: No EtherType filter is specified (EtherType filter status is don't-care).
Filter
•
Specific: If you want to filter a specific EtherType filter with this ACE, you can enter a
specific EtherType value. A field for entering a EtherType value appears.
When Specific is selected for the EtherType Filter, you can enter a specific EtherType value.
Ethernet
The allowed range is 0x600 to 0xFFFF but excluding 0x800(IPv4), 0x806(ARP) and
Type Value
0x86DD(IPv6). A frame that hits this ACE matches this EtherType value.
RocketLinx MP1204-XT User Guide: 2000644 Rev. A
Configuration | Security | Network | ACL | Access Control List | ACE
Security | Network | ACL | Access Control List
Configuration (Continued)
Configuration Pages - 99
Advertisement
Table of Contents
