Table of Contents
Advertisement
9.
Optionally, select the appropriate Network Topology, which is an
informational field.
10. Click the Apply Changes button.
11. Click Close to return to the main screen.
You are now ready to configure the ES8520-XT features.
FEATURE CONFIGURATION
The ES8520-XT provides both in-band and out-band configuration methods:
Out-band management means that you configure the ES8520-XT using the
RS-232 console cable and the Command Line Interface (CLI) to access the
ES8520-XT without attaching an admin PC to the network. You can also use
out-band management, if you lose the network connection to the ES8520-XT.
In-band management means that you connect remotely using the ES8520-
XT IP address through the network. You can remotely connect with the web
interface or a Telnet console and the CLI.
The following procedure uses a web browser to configure ES8520-XT
features. Refer to the User Guide for other configuration methods or
configuring features.
1.
Open a web browser and enter the IP address of the ES8520-XT.
2.
Enter admin for both the user name and the password when prompted.
3.
Use the web interface to configure your device as needed for your
network.
COMTROL CUSTOMER SERVICE
You can use one of the following methods to contact Comtrol.
Contact Method
Support
Downloads
Website
Phone
Warranty
Web Address or Phone Number
http://www.comtrol.com/support
http://downloads.comtrol.com
http://www.comtrol.com
+1 763.957.6000
http://downloads.comtrol.com/html/warranty.htm
7
Advertisement
Table of Contents
