Table of Contents
Advertisement
Security | Network | ACL | Access Control List
Item
Specify the destination MAC filter for this ACE.
•
Any: No DMAC filter is specified. (DMAC filter status is don't-care.)
•
MC: Frame must be multicast.
DMAC
•
BC: Frame must be broadcast.
Filter
•
UC: Frame must be unicast.
•
Specific: If you want to filter a specific destination MAC address with this ACE, choose
this value. A field for entering a DMAC value appears.
When Specific is selected for the DMAC filter, you can enter a specific destination MAC
DMAC
address. The legal format is xx-xx-xx-xx-xx-xx or xx.xx.xx.xx.xx.xx or xxxxxxxxxxxx (x is a
Value
hexadecimal digit). A frame that hits this ACE matches this DMAC value.
VLAN Parameters
Specify whether frames can hit the action according to the 802.1Q tagged. The allowed
values are:
•
Any: Any value is allowed (don't-care).
802.1Q
•
Enabled: Tagged frame only.
Tagged
•
Disabled: Untagged frame only.
The default value is Any.
Specify the VLAN ID filter for this ACE.
VLAN ID
•
Any: No VLAN ID filter is specified. (VLAN ID filter status is don't-care.)
Filter
•
Specific: If you want to filter a specific VLAN ID with this ACE, choose this value. A
field for entering a VLAN ID number appears.
When Specific is selected for the VLAN ID filter, you can enter a specific VLAN ID number.
VLAN ID
The allowed range is 1 to 4095. A frame that hits this ACE matches this VLAN ID value.
Specify the tag priority for this ACE. A frame that hits this ACE matches this tag priority.
Tag Priority
The allowed number range is 0 to 7 or range 0-1, 2-3, 4-5, 6-7, 0-3 and 4-7. The value Any
means that no tag priority is specified (tag priority is don't-care.)
ARP Parameters
Specify the available ARP/RARP opcode (OP) flag for this ACE.
•
Any: No ARP/RARP OP flag is specified. (OP is don't-care.)
ARP/RARP
•
ARP: Frame must have ARP opcode set to ARP.
•
RARP: Frame must have RARP opcode set to RARP.
•
Other: Frame has unknown ARP/RARP Opcode flag.
Specify the available Request/Reply opcode (OP) flag for this ACE.
•
Any: No Request/Reply OP flag is specified. (OP is don't-care.)
Request/
Reply
•
Request: Frame must have ARP Request or RARP Request OP flag set.
•
Reply: Frame must have ARP Reply or RARP Reply OP flag.
94 - Configuration Pages
Configuration | Security | Network | ACL | Access Control List | ACE
Configuration (Continued)
RocketLinx MP1204-XT User Guide: 2000644 Rev. A
Advertisement
Table of Contents
