Lldp Receive; Lldp Reinit <1-10; Lldp Timer <5-32768; Lldp Tlv-Select - Comtrol RocketLinx MP1204-XT User Manual

lldp receive

Description Enable/Disable decoding of received LLDP frames.
Syntax lldp receive
Parameters None
lldp reinit <1-10>
Description LLDP tx reinitialization delay in seconds.
Syntax lldp reinit <1-10>
Name
Parameter
<1-10>
lldp timer <5-32768>
Description Sets LLDP TX interval (The time between each LLDP frame transmitted in seconds).
Syntax lldp timer <5-32768>
Name
Parameter
<5-32768>

lldp tlv-select

Description Which optional TLVs to transmit.
lldp tlv-select { management-address | port-description | system-capabilities |
Syntax
system-description | system-name }
Name
management-address
port-description
Parameters
system-capabilities
system-description
system-name
RocketLinx MP1204-XT User Guide: 2000644 Rev. A
Description
Reinitialization delay time
Description
5-32768 seconds.
Description
Enable/Disable transmission of management address
Enable/Disable transmission of port description
Enable/Disable transmission of system capabilities
Enable/Disable transmission of system description
Enable/Disable transmission of system name.
LLDP Configure Commands
Command Line Interface (CLI) - 373