Table of Contents
Advertisement
IPMC | IGMP Snooping | Basic Configuration
IPMC | IGMP Snooping | Basic Configuration
Use this page to configure IGMP Snooping for the MP1204-XT.
Item
Snooping Enabled
Unregistered
IPMCv4 Flooding
Enabled
IGMP SSM Range
Leave Proxy
Enabled
Proxy Enabled
Router Port
Fast Leave
Throttling
124 - Configuration Pages
Configuration | IPMC | IGMP Snooping | Basic Configuration
Enable the Global IGMP Snooping.
Enable unregistered IPMCv4 traffic flooding.
The flooding control takes effect only when IGMP Snooping is enabled.
When IGMP Snooping is disabled, unregistered IPMCv4 traffic flooding is always
active in spite of this setting.
SSM (Source-Specific Multicast) Range allows the SSM-aware hosts and routers
run the SSM service model for the groups in the address range.
Enable IGMP Leave Proxy. This feature can be used to avoid forwarding
unnecessary leave messages on the router side.
Enable IGMP Proxy. This feature can be used to avoid forwarding unnecessary
join and leave messages on the router side.
Specify which ports act as router ports. A router port is a port on the Ethernet
switch that leads towards the Layer 3 multicast device or IGMP querier.
If an aggregation member port is selected as a router port, the whole aggregation
acts as a router port.
Enable the fast leave on the port.
Enable to limit the number of multicast groups to which a switch port can belong.
RocketLinx MP1204-XT User Guide: 2000644 Rev. A
Advertisement
Table of Contents
