Table of Contents
Advertisement
A
AMS
AMS is an acronym for Auto Media Select. AMS is used for dual media ports (ports supporting both copper
(cu) and fiber (SFP) cables. AMS automatically determines if a SFP or a CU cable is inserted and switches to
the corresponding media. If both SFP and cu cables are inserted, the port will select the preferred media.
APS
APS is an acronym for Automatic Protection Switching. This protocol is used to secure that switching is done
bidirectional in the two ends of a protection group, as defined in G.8031.
Aggregation
Using multiple ports in parallel to increase the link speed beyond the limits of a port and to increase the
redundancy for higher availability. (Also Port Aggregation, Link Aggregation).
ARP
ARP is an acronym for Address Resolution Protocol. It is a protocol that used to convert an IP address into a
physical address, such as an Ethernet address. ARP allows a host to communicate with other hosts when only
the Internet address of its neighbors is known. Before using IP, the host sends a broadcast ARP request
containing the Internet address of the desired destination system.
ARP Inspection
ARP Inspection is a secure feature. Several types of attacks can be launched against a host or devices
connected to Layer 2 networks by poisoning the ARP caches. This feature is used to block such attacks. Only
valid ARP requests and responses can go through the switch device.
Auto-Negotiation
Auto-negotiation is the process where two different devices establish the mode of operation and the speed
settings that can be shared by those devices for a link.
386 - Glossary
RocketLinx MP1204-XT User Guide: 2000644 Rev. A
Advertisement
Table of Contents
