Table of Contents
Advertisement
Configuration | Aggregation Menus
Configuration | Aggregation Menus
The following page are under the Configuration | Aggregation sub-menu.
•
Aggregation | Static
•
Aggregation | LACP
Aggregation | Static
Use this page to configure the aggregation hash mode and the aggregation group.
Item
Hash Code Contributors
Source MAC
Address
Destination
MAC
Address
IP Address
TCP/UDP
Port
Number
108 - Configuration Pages
on Page 108
on Page 109
Configuration | Aggregation | Static
The Source MAC Address can be used to calculate the destination port for
the frame. Check to enable the use of the Source MAC address, or
uncheck to disable. By default, Source MAC Address is enabled.
The Destination MAC Address can be used to calculate the destination port
for the frame. Check to enable the use of the Destination MAC Address, or
uncheck to disable. By default, Destination MAC Address is disabled.
The IP address can be used to calculate the destination port for the frame.
Check to enable the use of the IP Address, or uncheck to disable. By
default, IP Address is enabled.
The TCP/UDP Port Number can be used to calculate the destination port
for the frame. Check to enable the use of the TCP/UDP Port Number, or
uncheck to disable. By default, TCP/UDP Port Number is enabled.
RocketLinx MP1204-XT User Guide: 2000644 Rev. A
Advertisement
Table of Contents
