Table of Contents
Advertisement
QoS | QoS Control List
The QCE page includes the following fields.
Item
Check the checkbox button to include the port in the QCL entry. By default all ports are
Port Members
included.
Key configuration is described as below:
DMAC Destination MAC address: Possible values are Unicast, Multicast, Broadcast or
Any.
SMAC Source MAC address: xx-xx-xx-xx-xx-xx or Any. If a port is configured to match on
DMAC/DIP, this field is the Destination MAC address.
Tag Value of Tag field can be Untagged, Tagged or Any.
VID Valid value of VLAN ID can be any value in the range 1-4095 or Any; user can enter
either a specific value or a range of VIDs.
Key
PCP Valid value PCP are specific (0, 1, 2, 3, 4, 5, 6, 7) or range (0-1, 2-3, 4-5, 6-7, 0-3, 4-7)
parameters
or Any.
DEI Valid value of DEI can be 0, 1 or Any.
Inner Tag Value of Inner Tag field can be Untagged, Tagged, C-Tagged, S-Tagged or Any.
Inner VID Valid value of Inner VLAN ID can be any value in the range: 1-4095 or Any.
You can enter either a specific value or a range of VIDs.
Inner PCP Valid value of Inner PCP are specific (0, 1, 2, 3, 4, 5, 6, 7) or a range (0-1, 2-3,
4-5, 6-7, 0-3, 4-7) or Any.
Inner DEI Valid value of Inner DEI can be 0, 1, or Any.
168 - Configuration Pages
Configuration | QoS | QoS Control List | QCE Configuration
RocketLinx MP1204-XT User Guide: 2000644 Rev. A
Advertisement
Table of Contents
