Table of Contents
Advertisement
Security | Network | IP Source Guard Menus
Security | Network | IP Source Guard Menus
The following pages are under the IP Source Guard menu.
•
Security | Network | IP Source Guard| Configuration
•
Security | Network | IP Source Guard| Static Table
Security | Network | IP Source Guard| Configuration
This page provides IP Source Guard related configuration.
Item
Mode of IP Source
Guard Configuration
Port Mode
Configuration
Max Dynamic Clients
100 - Configuration Pages
Configuration | Network | IP Source Guard | Configuration
Enable the Global IP Source Guard or disable the Global IP Source Guard.
All configured ACEs are lost when the mode is enabled.
Specify IP Source Guard is enabled on which ports. Only when both Global
Mode and Port Mode on a given port are enabled, IP Source Guard is enabled
on this given port.
Specify the maximum number of dynamic clients that can be learned on given
port. This value can be 0, 1, 2 or unlimited. If the port mode is enabled and
the value of max dynamic client is equal to 0, it means only allow the IP
packets forwarding that are matched in static entries on the specific port.
on Page 100
on Page 101
RocketLinx MP1204-XT User Guide: 2000644 Rev. A
Advertisement
Table of Contents
