Table of Contents
Advertisement
Spanning Tree | MSTI Mapping
Spanning Tree | MSTI Mapping
Use this page to inspect the current STP MSTI bridge instance priority configuration, and if necessary make
changes.
Item
Configuration Identification
Configuration
Name
Configuration
Revision
MSTI Mapping
MSTI
VLANs Mapped
114 - Configuration Pages
Configuration | Spanning Tree | MSTI Mapping
The name identifying the VLAN to MSTI mapping. Bridges must share the
name and revision (see below), as well as the VLAN-to-MSTI mapping
configuration in order to share spanning trees for MSTI's (Intra-region). The
name is at most 32 characters.
The revision of the MSTI configuration named above. This must be an
integer between 0 and 65535.
The bridge instance. The CIST is not available for explicit mapping, as it
receives the VLANs not explicitly mapped.
The list of VLANs mapped to the MSTI. The VLANs can be given as a single
(xx, xx being between 1 and 4094) VLAN, or a range (xx-yy), each of which
must be separated with comma and/or space. A VLAN can only be mapped
to one MSTI. Example: 2,5,20-40.
An unused MSTI should just be left empty. That is, not having any VLANs
mapped to it.
RocketLinx MP1204-XT User Guide: 2000644 Rev. A
Advertisement
Table of Contents
