Table of Contents
Advertisement
Notation Conventions
The notation conventions for the parameter syntax of each CLI command are as follows:
•
Parameters enclosed in [ ] are optional.
•
Parameter values are separated by a vertical bar (|) only when one of the specified values can be used.
•
Parameter values are enclosed in { } when you must use one of the values specified.
Initialize Mode Commands
The commands in this section (except enable command) can be executed under all command modes. These
commands are global commands.
exit
Description
Exit current mode and quit CLI.
Syntax
exit
Parameter
None
configure terminal
Description
Enter configuration mode.
Syntax
configure terminal
Parameter
None
enable
Description
Enter enable mode.
Syntax
enable
Parameter
None
Show terminal
Description
Show CLI environment variables
Syntax
show terminal
Parameter
None
RocketLinx MP1204-XT User Guide: 2000644 Rev. A
Notation Conventions
Command Line Interface (CLI) - 271
Advertisement
Table of Contents
