Table of Contents
Advertisement
Item
Port Egress Rewriting can be one of the following:
•
•
•
Egress
•
QoS | DSCP-Based QoS
This page allows you to configure the basic QoS DSCP based QoS Ingress Classification settings for all
switches.
Item
DSCP
Maximum number of supported DSCP values are 64.
Controls whether a specific DSCP value is trusted. Only frames with trusted
Trust
DSCP values are mapped to a specific QoS class and Drop Precedence Level.
Frames with untrusted DSCP values are treated as a non-IP frame.
Qos Class
QoS class value can be any of (0-7)
DPL
Drop Precedence Level (0-1)
RocketLinx MP1204-XT User Guide: 2000644 Rev. A
Configuration | QoS | DSCP (Continued)
Disable: No Egress rewrite.
Enable: Rewrite enabled without remapping.
Remap DP Unaware: DSCP from analyzer is remapped and frame is remarked
with remapped DSCP value. The remapped DSCP value is always taken from
the DSCP Translation | Egress Remap DP0 table.
Remap DP Aware: DSCP from analyzer is remapped and frame is remarked
with remapped DSCP value. Depending on the DP level of the frame, the
remapped DSCP value is either taken from the DSCP Translation | Egress
Remap DP0 table or from the DSCP Translation | Egress Remap DP1 table.
Configuration | QoS | DSCP-Based QoS
QoS | DSCP-Based QoS
Configuration Pages - 163
Advertisement
Table of Contents
