Led Status Indications - Comtrol RocketLinx MP1204-XT User Manual

LED Status Indications

LED Status Indications
After you apply power, you can verify the state of the MP1204-XT.
LED Name
P1/P2
Alarm
Copper Port Link/Act
Copper Port Speed
SFP Port Link/Act
SFP Port Speed
PoE LED
RR
RS
26 - Installing the Hardware
Indicator/Color
On Green P1/P2 is receiving power
P1/P2 is disconnected or does not have
Off
power applied
If configured, Ethernet link fails, alarm
On Red
or power failure alarm occurs
No conditions configured or there are
Off
not any failures
Ethernet link up but no traffic is
On Green
detected
Ethernet link up and there is traffic
Flashing Green
detected
Off Ethernet link down
On Yellow A 1000Mbps connection is detected
No link, a 10Mbps or 100 Mbps
Off
connection is detected
On Green Ethernet link up
Off Ethernet link down
SFP port speed 1000Mbps connection is
On Yellow
detected
No link or a SFP port speed 100Mbps
Off
connection is detected
On Yellow PoE is detected
Off No link
Not configured as the Ring-Master and
Off
ring is not configured.
RR lights when the Role of the Ring is
configured as the Ring-Master and Ring
is enabled with the following roles.
On
•
•
Off Ring or Chain failure not detected.
Lights when a Ring (or Chain) Signal
On
Failure is detected.
Condition
Chain (Tail)
Balancing Chain (Central Block)
RocketLinx MP1204-XT User Guide: 2000644 Rev. A