Table of Contents
Advertisement
Monitor - sFlow
Monitor - sFlow
This page shows receiver and per-port sFlow statistics.
Item
Receiver Statistics
This field shows the current owner of the sFlow configuration. It assumes one of
three values as follows:
•
Owner
•
•
IP Address/
The IP address or hostname of the sFlow receiver.
Hostname
The number of seconds remaining before sampling stops and the current sFlow
Timeout
owner is released.
Tx Successes
The number of UDP datagrams successfully sent to the sFlow receiver.
The number of UDP datagrams that has failed transmission.
The most common source of errors is invalid sFlow receiver IP/hostname
Tx Errors
configuration. To diagnose, paste the receiver's IP address/hostname into the Ping
page (Diagnostics | Ping/Ping6).
Flow Samples
The total number of flow samples sent to the sFlow receiver.
Counter Samples
The total number of counter samples sent to the sFlow receiver.
252 - Monitor Pages
If sFlow is currently unconfigured/unclaimed, Owner contains <none>.
If sFlow is currently configured through Web or CLI, Owner contains <Configured
through local management>.
If sFlow is currently configured through SNMP, Owner contains a string
identifying the sFlow receiver.
Monitor | sFlow
RocketLinx MP1204-XT User Guide: 2000644 Rev. A
Advertisement
Table of Contents
