Table of Contents
Advertisement
Configuration | MAC Table
The MAC Address Table is configured on this page. Set timeouts for entries in the dynamic MAC Table and
configure the static MAC table.
Item
Aging Configuration
Disable Automatic Aging
Aging Time
MAC Table Learning
Auto
Disable
Secure
Static MAC Table Learning
Delete
VLAN ID
MAC Address
RocketLinx MP1204-XT User Guide: 2000644 Rev. A
Configuration | MAC Table
Disable the automatic aging of dynamic entries by ticking the item.
Enter a value in seconds.
The allowed range is 10 to 1000000 seconds.
Learning is done automatically as soon as a frame with unknown
SMAC is received.
No learning is done.
Only static MAC entries are learned, all other frames are dropped.
Note: Make sure that the link used for managing the switch is added to
the Static Mac Table before changing to secure learning mode,
otherwise the management link is lost and can only be restored
by using another non-secure port or by connecting to the switch
via the serial interface.
Check to delete the entry. It is deleted during the next save.
The VLAN ID of the entry.
The MAC address of the entry.
Configuration | MAC Table
Configuration Pages - 143
Advertisement
Table of Contents
