Security | Switch | Rmon | Alarm - Comtrol RocketLinx MP1204-XT User Manual

Industrial poe managed switch 8 - gigabit copper ports 4 - gigabit sfp ports
Table of Contents

Advertisement

Security | Switch | RMON | Alarm

Security | Switch | RMON | Alarm
Use this page to configure the RMON Alarm table. The entry index key is ID.
Item
Delete
ID
Interval
Variable
Sample Type
Value
72 - Configuration Pages
Configuration | Security | Switch | RMON | Alarm
Check to delete the entry. It is deleted during the next save.
Indicates the index of the entry. The range is from 1 to 65
Indicates the interval in seconds for sampling and comparing the rising and falling
threshold. The range is from 1 to 2^31-1.
Indicates the particular variable to be sampled, the possible variables are:
InOctets: The total number of octets received on the interface, including framing
characters.
InUcastPkts: The number of uni-cast packets delivered to a higher-layer protocol.
InNUcastPkts: The number of broad-cast and multi-cast packets delivered to a
higher-layer protocol.
InDiscards: The number of inbound packets that are discarded even the packets
are normal.
InErrors: The number of inbound packets that contained errors preventing them
from being deliverable to a higher-layer protocol.
InUnknownProtos: The number of the inbound packets that were discarded
because of the unknown or un-support protocol.
OutOctets: The number of octets transmitted out of the interface, including
framing characters.
OutUcastPkts: The number of uni-cast packets that request to transmit.
OutNUcastPkts: The number of broadcast and multicast packets that request to
transmit.
OutDiscards: The number of outbound packets that are discarded event the
packets is normal.
OutErrors: The number of outbound packets that could not be transmitted
because of errors.
OutQLen: The length of the output packet queue (in packets).
The method of sampling the selected variable and calculating the value to be
compared against the thresholds, possible sample types are:
Absolute: Get the sample directly.
Delta: Calculate the difference between samples (default).
The value of the statistic during the last sampling period.
RocketLinx MP1204-XT User Guide: 2000644 Rev. A

Advertisement

Table of Contents
loading

Table of Contents