Configuration | Security | Network Menus
This subsection discusses Network menus and pages under the Configuration | Security | Network menu.
•
Security | Network | Limit Control
•
Security | Network | NAS
•
Security | Network | ACL Menus
•
Security | Network | IP Source Guard Menus
•
Security | Network | ARP Inspection Menus
Security | Network | Limit Control
This page allows you to configure the Port Security Limit Control system and port settings.
Limit Control allows for limiting the number of users on a given port. A user is identified by a MAC address
and VLAN ID. If Limit Control is enabled on a port, the limit specifies the maximum number of users on the
port. If this number is exceeded, an action is taken. The action can be one of the four different actions as
described the table below.
The Limit Control module utilizes a lower-layer module, Port Security module, which manages MAC
addresses learnt on the port.
The Limit Control configuration consists of two sections, a system- and a port-wide.
RocketLinx MP1204-XT User Guide: 2000644 Rev. A
on Page 75
on Page 78
on Page 87
on Page 100
on Page 101
Configuration | Security | Network Menus
Configuration Pages - 75