Table of Contents
Advertisement
Security | Network | ACL | Access Control List
Item
Specify the hop limit settings for this ACE.
•
zero: IPv6 frames with a Hop Limit field greater than zero must not be able to match
this entry.
Hop Limit
•
non-zero: IPv6 frames with a Hop Limit field greater than zero must be able to match
this entry.
•
Any: Any value is allowed (don't-care).
ICMP Parameters
Specify the ICMP filter for this ACE.
ICMP Type
•
Any: No ICMP filter is specified (ICMP filter status is don't-care).
Filter
•
Specific: If you want to filter a specific ICMP filter with this ACE, you can enter a
specific ICMP value. A field for entering an ICMP value appears.
ICMP Type
When Specific is selected for the ICMP filter, you can enter a specific ICMP value. The
Value
allowed range is 0 to 255. A frame that hits this ACE matches this ICMP value.
Specify the ICMP code filter for this ACE.
ICMP Code
•
Any: No ICMP code filter is specified (ICMP code filter status is don't-care).
Filter
•
Specific: If you want to filter a specific ICMP code filter with this ACE, you can enter a
specific ICMP code value. A field for entering an ICMP code value appears.
ICMP Code
When Specific is selected for the ICMP code filter, you can enter a specific ICMP code value.
Value
The allowed range is 0 to 255. A frame that hits this ACE matches this ICMP code value.
TCP/UDP Parameters
Specify the TCP/UDP source filter for this ACE.
•
Any: No TCP/UDP source filter is specified (TCP/UDP source filter status is don't-care).
•
Specific: If you want to filter a specific TCP/UDP source filter with this ACE, you can
TCP/UDP
enter a specific TCP/UDP source value. A field for entering a TCP/UDP source value
Source Filter
appears.
•
Range: If you want to filter a specific TCP/UDP source range filter with this ACE, you
can enter a specific TCP/UDP source range value. A field for entering a TCP/UDP
source value appears.
When Specific is selected for the TCP/UDP source filter, you can enter a specific TCP/UDP
TCP/UDP
source value. The allowed range is 0 to 65535. A frame that hits this ACE matches this
Source No.
TCP/UDP source value.
TCP/UDP
When Range is selected for the TCP/UDP source filter, you can enter a specific TCP/UDP
Source
source range value. The allowed range is 0 to 65535. A frame that hits this ACE matches
Range
this TCP/UDP source value.
Specify the TCP/UDP destination filter for this ACE.
•
Any: No TCP/UDP destination filter is specified (TCP/UDP destination filter status is
don't-care).
TCP/UDP
•
Specific: If you want to filter a specific TCP/UDP destination filter with this ACE, you
Destination
can enter a specific TCP/UDP destination value. A field for entering a TCP/UDP
Filter
destination value appears.
•
Range: If you want to filter a specific range TCP/UDP destination filter with this ACE,
you can enter a specific TCP/UDP destination range value. A field for entering a TCP/
UDP destination value appears.
98 - Configuration Pages
Configuration | Security | Network | ACL | Access Control List | ACE
Configuration (Continued)
RocketLinx MP1204-XT User Guide: 2000644 Rev. A
Advertisement
Table of Contents
