Ddmi; Default Access-List Rate-Limiter; Profile Sch; Ntp Server <1-5> Ip-Address <Ip - Comtrol RocketLinx MP1204-XT User Manual

Configure Mode Commands

ddmi

Description Enable DDMI function
Syntax ddmi
Parameter None

default access-list rate-limiter

Description Rate limiter
Syntax default access-list rate-limiter [ <rate_limiter_list> ]
Name
Parameter
RateLimiterId : 1-16

profile sch

Description Enter Scheduling Profile Config Mode
Syntax profile sch
Parameter None
ntp server <1-5> ip-address <ip>
Description Set NTP server address.
Syntax ntp server <1-5> ip-address { <ipv4_ucast> | <ipv6_ucast> | <hostname> }
Name
<1-5>
<ipv4>
Parameters
<ipv6>
<hostname>
302 - Command Line Interface (CLI)
Description
Rate limiter ID
Description
index number
Type: Mandatory
Server name
RocketLinx MP1204-XT User Guide: 2000644 Rev. A