Table of Contents
Advertisement
Security | Network | ARP Inspection | VLAN Configuration
Each page shows up to 9999 entries from the VLAN table, the default is 20, selected through the entries per
page field. When first visited, the page shows the first 20 entries from the beginning of the VLAN Table. The
first displayed are the one with the lowest VLAN ID found in the VLAN Table.
The VLAN input fields allow you to select the starting point in the VLAN Table. Clicking the button updates
the displayed table starting from that or the closest next VLAN Table match. The MP1204-XT uses the next
entry of the currently displayed VLAN entry as a basis for the next lookup. When the end is reached the
warning message is shown in the displayed table. Use the Reset button to start over.
Specify ARP Inspection is enabled on which VLANs. First, you have to enable the port setting on Port mode
configuration page. Only when both Global Mode and Port Mode on a given port are enabled, ARP Inspection
is enabled on this given port. Second, you can specify which VLAN is inspected on VLAN mode configuration
page. The log type also can be configured on per VLAN setting.
Possible types are:
•
None: Log nothing.
•
Deny: Log denied entries.
•
Permit: Log permitted entries.
•
All: Log all entries
Security | Network | ARP Inspection | Static Table
This page shows the static ARP inspection rules. The maximum number of rules is 256 on the MP1204-XT.
Item
Delete
Port
VLAN ID
RocketLinx MP1204-XT User Guide: 2000644 Rev. A
Configuration | Security | Network | ARP Inspection | Static Table
Check to delete the entry. It is deleted during the next save.
The logical port for the settings
The VLAN ID for the settings.
Security | Network | ARP Inspection | VLAN Configuration
Configuration Pages - 103
Advertisement
Table of Contents
