Table of Contents
Advertisement
Configuration | Mirroring
Configure port Mirroring on this page.
To debug network problems, selected traffic can be copied, or mirrored, on a mirror port where a frame
analyzer can be attached to analyze the frame flow.
The traffic to be copied on the mirror port is selected as follows:
•
All frames received on a given port (also known as ingress or source mirroring).
•
All frames transmitted on a given port (also known as egress or destination mirroring).
Item
Mirroring & Remote Mirroring Configuration
Mode
Type
RocketLinx MP1204-XT User Guide: 2000644 Rev. A
To Enabled/Disabled the mirror or Remote Mirroring function.
Select switch type.
•
Mirror: The switch is running on mirror mode. The source port(s) and
destination port are located on this switch.
•
Source: The switch is a source node for monitor flow. The source port(s), reflector
port and intermediate port(s) are located on this switch.
•
Intermediate: The switch is a forwarding node for monitor flow and the switch is
an option node. The object is to forward traffic from source switch to destination
switch. The intermediate ports are located on this switch.
•
Destination: The switch is an end node for monitor flow. The destination port(s)
and intermediate port(s) are located on this switch.
Configuration | Mirroring
Configuration | Mirroring
Configuration Pages - 171
Advertisement
Table of Contents
