Table of Contents
Advertisement
Enable Mode Commands
show access-list
Description
Access list
show access-list [ interface [ ( <port_type> [ <v_port_type_list> ] ) ] ] [ rate-limiter [
<rate_limiter_list> ] ] [ ace statistics [ <ace_list> ] ]
Syntax
show access-list ace-status [ static ] [ link-oam ] [ loop-protect ] [ dhcp ] [ ptp ] [
upnp ] [ arp-inspection ] [ mep ] [ ipmc ] [ ip-source-guard ] [ ip-mgmt ] [ conflicts ] [
switch <switch_list> ]
Name
interface
ace-status
port_type
v_port_type_list
rate-limiter
rate_limiter_list
ace
statistics
Parameters
ace_list
static
loop-protect
ipmc
ip-source-guard
dhcp
conflicts
arp-inspection
show aggregation
Description
Aggregation
Syntax
show aggregation [ mode ]
Name
Parameter
mode
274 - Command Line Interface (CLI)
Description
Select an interface to configure
The local ACEs status
GigabitEthernet,1 Gigabit Ethernet Port
PORT_LIST, Port list in 1/1-14
Rate limiter
<RateLimiterList : 1~16> Rate limiter ID
Access list entry
Traffic statistics
<AceId : 1~256>
ACE ID
The ACEs that are configured by users manually
The ACEs that are configured by Loop Protect module
The ACEs that are configured by IPMC module
The ACEs that are configured by IP Source Guard module
The ACEs that are configured by DHCP module
The ACEs that did not get applied to the hardware due to
hardware limitations
The ACEs that are configured by ARP Inspection module
Description
Traffic distribution mode
RocketLinx MP1204-XT User Guide: 2000644 Rev. A
Advertisement
Table of Contents
