Using The Web Interface To Reset The Default Settings - Comtrol RocketLinx MP1204-XT User Manual

Using the Web Interface to Reset the Default Settings

Using the Web Interface to Reset the Default Settings
Use this procedure to reset the configuration to default settings but keep the IP settings.
1. Log into the web interface using the IP address.
2. Click Maintenance | Factory Defaults and then click the Yes button.
3. Click Maintenance | Configuration | Save startup-config.
4. Click the Save Configuration button.
Use this procedure if you want to reset all of the configuration settings including the IP settings.
1. Click Maintenance | Configuration | Activate.
2. Select default-config and then click the Activate Configuration button.
3. Change your system's IP address to the same network segment as 192.168.250.X networks.
4. Log into the MP1204-XT default IP address (192.168.250.250).
262 - Maintenance Pages RocketLinx MP1204-XT User Guide: 2000644 Rev. A