Table of Contents
Advertisement
Item
Specify the mirror operation of this port. The allowed values are:
•
Mirror
•
The default value is Disabled.
CPU
Forward packet that matched the specific ACE to CPU.
CPU Once
Forward first packet that matched the specific ACE to CPU.
Counter
The counter indicates the number of times the ACE was hit by a frame.
Indicates the hardware status of the specific ACE. The specific ACE is not applied to
Conflict
the hardware due to hardware limitations.
Security | Network | ARP Inspection
Each page shows up to 99 entries from the Dynamic ARP Inspection table, default being 20, selected through
the entries per page input field. When first visited, the page shows the first 20 entries from the beginning of the
Dynamic ARP Inspection Table.
The Start from port address, VLAN, MAC address and IP address input fields allows you to select the starting
point in the Dynamic ARP Inspection Table. Clicking the Refresh button updates the displayed table starting
from that or the closest next Dynamic ARP Inspection Table match. In addition, the two input fields will -
upon a Refresh button click - assume the value of the first displayed entry, allowing for continuous refresh
with the same start address.
The
uses the last entry of the currently displayed table as a basis for the next lookup.
When the end is reached the text No more entries is shown in the displayed table. Use the
start over.
RocketLinx MP1204-XT User Guide: 2000644 Rev. A
Monitor | Security | ACL Status (Continued)
Enabled: Frames received on the port are mirrored.
Disabled: Frames received on the port are not mirrored.
Security | Network | ARP Inspection
Monitor Pages - 211
button to
Advertisement
Table of Contents
