QoS | DSCP Translation
QoS | DSCP Translation
This page allows you to configure the basic QoS DSCP Translation settings for all switches. DSCP translation
can be done in Ingress or Egress.
Item
DSCP
Ingress
Translation
Classify
Egress
Remap DP0
Remap DP1
164 - Configuration Pages
Configuration | QoS | DSCP Translation
Maximum number of supported DSCP values are 64 and valid DSCP
value ranges from 0 to 63.
Ingress side DSCP can be first translated to new DSCP before using the
DSCP for QoS class and DPL map.
There are two configuration parameters for DSCP Translation:
•
Translate
•
Classify
DSCP at Ingress side can be translated to any of (0-63) DSCP values.
Click to enable Classification at Ingress side.
There are the following configurable parameters for Egress side:
•
Remap DP0 Controls the remapping for frames with DP level 0.
•
Remap DP1 Controls the remapping for frames with DP level 1.
Select the DSCP value from select menu to which you want to remap.
DSCP value ranges form 0 to 63.
Select the DSCP value from select menu to which you want to remap.
DSCP value ranges form 0 to 63.
RocketLinx MP1204-XT User Guide: 2000644 Rev. A