Table of Contents
Advertisement
Item
Configuration | VCL | Protocol-Based VLAN | Protocol to Group (Continued)
A valid Group Name is a unique 16-character long string for every entry which consists of
a combination of alphabets (a-z or A-Z) and integers(0-9).
Group Name
Note: Special character and underscore(_) are not allowed.
Click to add a new entry in the mapping table.
VCL | Protocol-Based VLAN | Group to VLAN
This page allows you to map a already configured Group Name to a VLAN for the MP1204-XT.
Item
Delete
Group Name
VLAN ID
Port Members
RocketLinx MP1204-XT User Guide: 2000644 Rev. A
Configuration | VCL | Protocol-Based VLAN | Group to VLAN
To delete a Group Name to VLAN map entry, check this box. The entry is deleted on
the switch during the next Save.
A valid Group Name is a string at the most 16 characters which consists of a
combination of alphabets (a-z or A-Z) and integers(0-9), no special character is
allowed. whichever Group name you try map to a VLAN must be present in Protocol
to Group mapping table and must not be pre-used by any other existing mapping
entry on this page.
Indicates the ID to which Group Name is mapped. A valid VLAN ID ranges from 1-
4095.
A row of check boxes for each port is displayed for each Group Name to VLAN ID
mapping. To include a port in a mapping, check the box. To remove or exclude the
port from the mapping, make sure the box is unchecked. By default, no ports are
members, and all boxes are unchecked.
Click the Add New Entry button to add a new entry in mapping table. An empty row
is added to the table, the Group Name, VLAN ID and port members can be
configured as needed. Legal values for a VLAN ID are 1 through 4095.
The Delete button can be used to undo the addition of new entry. The maximum
possible Group to VLAN mappings are limited to 64.
VCL | Protocol-Based VLAN | Group to VLAN
Configuration Pages - 151
Advertisement
Table of Contents
