Table of Contents
Advertisement
System | Alarm Profile
This page provides configuration to enable or disable the alarm.
Item
ID
The identification of the Alarm Profile entry.
Description
Alarm Type Description.
If alarm entry is Enabled, then the alarm is shown in the alarm history/current
when it occurs.
Enabled
The Alarm LED is lit, the Alarm Relay is also enabled.
SNMP trap are sent if any SNMP trap entry exists and enabled.
If the alarm entry is Disabled, then the alarm is not be captured/shown in alarm
Disabled
history/current when an alarm occurs; then it does not trigger the Alarm LED
change, Alarm Relay and SNMP trap either.
Note: When any alarm exists, the Alarm LED is on (lighted), Alarm Output Relay is also enabled.
RocketLinx MP1204-XT User Guide: 2000644 Rev. A
Configuration | System | Alarm Profile
System | Alarm Profile
Configuration Pages - 45
Advertisement
Table of Contents
