Table of Contents
Advertisement
Security | AAA | RADIUS
Item
NAS-IP-Address
(Attribute 4)
NAS-IPv6-
Address
(Attribute 95)
NAS-Identifier
(Attribute 32)
Server Configuration
Delete
Hostname
Auth Port
Acct Port
Timeout
Retransmit
Key
106 - Configuration Pages
Configuration | Security | AAA | RADIUS (Continued)
The IPv4 address to be used as Attribute 4 in RADIUS Access-Request packets. If
this field is left blank, the IP address of the outgoing interface is used.
The IPv6 address to be used as Attribute 95 in RADIUS Access-Request packets. If
this field is left blank, the IP address of the outgoing interface is used.
The identifier, up to 253 characters long is to be used as Attribute 32 in RADIUS
Access-Request packets. If this field is left blank, the NAS-Identifier is not included
in the packet.
To delete a RADIUS server entry, check this box. The entry is deleted during the
next Save.
The IP address or hostname of the RADIUS server.
The UDP port to use on the RADIUS server for authentication.
The UDP port to use on the RADIUS server for accounting.
This optional setting overrides the global timeout value. Leaving it blank uses the
global timeout value.
This optional setting overrides the global retransmit value. Leaving it blank uses
the global retransmit value.
This optional setting overrides the global key. Leaving it blank uses the global key.
Click to add a new RADIUS server, up to five servers are supported.
RocketLinx MP1204-XT User Guide: 2000644 Rev. A
Advertisement
Table of Contents
