Table of Contents
Advertisement
IPMC | MLD Snooping | VLAN Configuration
Item
Proxy Enable
Router Port
Fast Leave
Throttling
IPMC | MLD Snooping | VLAN Configuration
Each page shows up to 99 entries from the VLAN table, default being 20, selected through the entries per page
input field. When first visited, the page shows the first 20 entries from the beginning of the VLAN Table. The
first displayed are the ones with the lowest VLAN ID found in the VLAN Table.
The VLAN input fields allow you to select the starting point in the VLAN Table.
Item
Delete
Check to delete the entry. The designated entry is deleted during the next save.
VLAN ID
The VLAN ID of the entry.
MLD Snooping
Enable the per-VLAN MLD Snooping. Up to 32 VLANs can be selected for MLD
Enabled
Snooping.
Enable to join MLD Querier election in the VLAN. Disable to act as a MLD Non-
Querier Election
Querier.
Compatibility is maintained by hosts and routers taking appropriate actions
depending on the versions of MLD operating on hosts and routers within a network.
The allowed selection is MLD-Auto, Forced MLDv1, Forced MLDv2, the default
Compatibility
compatibility value is MLD-Auto.
It indicates the MLD control frame priority level generated by the MP1204-XT. These
values can be used to prioritize different classes of traffic.
128 - Configuration Pages
Configuration | IPMC | MLD Snooping | Basic Configuration
Enable MLD Proxy. This feature can be used to avoid forwarding
unnecessary join and leave messages to the router side.
Specify which ports act as router ports. A router port is a port on the
Ethernet switch that leads towards the Layer 3 multicast device or
MLD querier.
If an aggregation member port is selected as a router port, the whole
aggregation acts as a router port.
Enable the fast leave feature on the port.
Enable to limit the number of multicast groups to which a switch port
can belong.
Configuration | IPMC | MLD Snooping | VLAN Configuration
(Continued)
RocketLinx MP1204-XT User Guide: 2000644 Rev. A
Advertisement
Table of Contents
