Table of Contents
Advertisement
Configuration | VLANs
Item
Port Members
Configuration | VLANs
This page allows for controlling VLAN configuration on the MP1204-XT. The page is divided into a global
section and a per-port configuration section.
Items
Global VLAN Configuration
This field shows the allowed Access VLANs, i.e. it only affects ports configured as Access
ports. Ports in other modes are members of all VLANs specified in the Allowed VLANs
field. By default, only VLAN 1 is enabled. More VLANs may be created by using a list
Allowed Access
syntax where the individual elements are separated by commas. Ranges are specified
VLANs
with a dash separating the lower and upper bound.
The following example creates VLANs 1, 10, 11, 12, 13, 200, and 300: 1,10-13,200,300.
Spaces are allowed in between the delimiters.
Ethertype for
This field specifies the ethertype/TPID (specified in hexadecimal) used for Custom S-
ports. The setting is in force for all ports whose Port Type is set to S-Custom-Port.
Custom S-ports
144 - Configuration Pages
Configuration | MAC Table (Continued)
Check marks indicate which ports are members of the entry. Check or
uncheck as needed to modify the entry.
Click the Add New Static Entry button to add a new entry to the static
MAC table. Specify the VLAN ID, MAC address, and port members for
the new entry. Click Save.
Configuration | VLANs
RocketLinx MP1204-XT User Guide: 2000644 Rev. A
Advertisement
Table of Contents
