Table of Contents
Advertisement
8. Select DHCP IP or Static IP for the IP Mode .
•
If you select DHCP IP, go to Step 9.
If you select Static IP, enter an IP address, Subnet Mask, and
•
Default Gateway value for your network.
9. Optionally, select the appropriate Network Topology, which is an
informational field.
10. Click the Apply Changes button.
11. Click Close to return to the main screen.
12. You are now ready to configure the ES8510 features.
FEATURE CONFIGURATION
The ES8510 provides both in-band and out-band configuration methods:
Out-band management means that you configure the ES8510 using the
RS-232 console cable and the Command Line Interface (CLI) to access the
ES8510 without attaching an admin PC to the network. You can also use
out-bound management, if you lost the network connection to the
ES8510.
In-band management means that you connect remotely using the ES8510 IP
address through the network. You can remotely connect with the
ES8510 web interface or a Telnet console and the CLI.
The following procedure uses a web browser to configure ES8510
features. Refer to the appropriate RocketLinx ES8510 User Guide for other
configuration methods.
1.
Open a web browser and enter the IP address of the ES8510.
2.
Enter admin for both the user name and the password when prompted.
3.
Use the web interface to configure your device as needed for your
network.
You can use the help system or the appropriate User Guide for information
about configuring other ES8510 features.
6
Advertisement
Table of Contents
