Table of Contents
Advertisement
Security | Network | ACL | Access Control List
The ACE Configuration page includes the following fields.
Item
Select the ingress port for which this ACE applies.
•
All: The ACE applies to all port.
Ingress Port
•
Port n: The ACE applies to this port number, where n is the number of the MP1204-XT
port.
Specify the policy number filter for this ACE.
•
Any: No policy filter is specified. (policy filter status is don't-care.)
Policy Filter
•
Specific: If you want to filter a specific policy with this ACE, choose this value. Two field
for entering an policy value and bitmask appears.
When Specific is selected for the policy filter, you can enter a specific policy value. The
Policy Value
allowed range is 0 to 255.
When Specific is selected for the policy filter, you can enter a specific policy bitmask. The
allowed range is 0x0 to 0xff. Notice the usage of bitmask, if the binary bit value is 0, it
Policy
means this bit is don't-care. The real matched pattern is [policy_value & policy_bitmask].
Bitmask
For example, if the policy value is 3 and the policy bitmask is 0x10(bit 0 is don't-care bit),
then policy 2 and 3 are applied to this rule.
Select the frame type for this ACE. These frame types are mutually exclusive.
•
Any: Any frame can match this ACE.
•
Ethernet Type: Only Ethernet Type frames can match this ACE. The IEEE 802.3
describes the value of Length/Type Field specifications to be greater than or equal to
1536 decimal (equal to 0600 hexadecimal).
Frame Type
•
ARP: Only ARP frames can match this ACE. Notice the ARP frames won't match the
ACE with Ethernet type.
•
IPv4: Only IPv4 frames can match this ACE. Notice the IPv4 frames won't match the
ACE with Ethernet type.
•
IPv6: Only IPv6 frames can match this ACE. Notice the IPv6 frames won't match the
ACE with Ethernet type.
92 - Configuration Pages
Configuration | Security | Network | ACL | Access Control List | ACE
Configuration
RocketLinx MP1204-XT User Guide: 2000644 Rev. A
Advertisement
Table of Contents
