Interface VLAN Mode Commands
switchport trunk allowed vlan
Description
Set allowed VLAN characteristics when interface is in trunk mode
Syntax
switchport trunk allowed vlan { all | none | [ add | remove | except ] <vlan_list> }
Name
all
none
Parameters
add
remove
except
vlan_list
switchport vlan protocol group
Description
Protocol-based VLAN group commands
Syntax
switchport vlan protocol group <word16> vlan <vlan_id>
Name
word16
Parameters
vlan_id
Interface VLAN Mode Commands
This subsection contains the Interface VLAN mode commands.
interface
Description
Interface configuration
Syntax
interface <port_type> [ <port_type_list> ]
Name
Parameters
port_type
port_type_list
330 - Command Line Interface (CLI)
Description
All VLANs
No VLANs
Add VLANs to the current list
Remove VLANs from the current list
All VLANs except the following
VLAN IDs of the allowed VLANs when this port is in trunk mode
Description
Group Name (Range: 1 - 16 characters)
VLAN ID required for the group to VLAN
mapping (Range: 1-4095)
Description
Port type in Fast or Giga
List of Port ID, ex, 1/1,3-5;2/2-4,6
RocketLinx MP1204-XT User Guide: 2000644 Rev. A