Table of Contents
Advertisement
FEATURE CONFIGURATION
The ES7510-XT provides both in-band and out-band configuration methods:
Out-band management means that you configure the ES7510-XT using the
RS-232 console cable and the Command Line Interface (CLI) to access the
ES7510-XT without attaching an admin PC to the network. You can also use
out-band management, if you lose the network connection to the ES7510-XT.
In-band management means that you connect remotely using the ES7510-
XT IP address through the network. You can remotely connect with the web
interface or a Telnet console and the CLI.
The following procedure uses a web browser to configure ES7510-XT
features. Refer to the User Guide for other configuration methods or
configuring features.
1.
Open a web browser and enter the IP address of the ES7510-XT.
2.
Enter admin for both the user name and the password when prompted.
3.
Use the web interface to configure your device as needed for your
network.
COMTROL CUSTOMER SERVICE
You can use one of the following methods to contact Comtrol.
Contact Method
Support
Downloads
Website
Phone
Warranty
Web Address or Phone Number
http://www.comtrol.com/support
http://downloads.comtrol.com
http://www.comtrol.com
+1 763.957.6000
downloads.comtrol.com/html/warranty.htm
7
Advertisement
Table of Contents
