Table of Contents
Advertisement
Item
Ingress Filtering
Frame Type
Port VALN ID
Tx Tag
Untagged VLAN
ID
Conflicts
RocketLinx MP1204-XT User Guide: 2000644 Rev. A
Shows whether a given user wants ingress filtering enabled or not.
The field is empty if not overridden by the selected user.
Shows the acceptable frame types (All, Taged, Untagged) that a given user
wants to configure on the port.
The field is empty if not overridden by the selected user.
Shows the Port VLAN ID (PVID) that a given user wants the port to have.
The field is empty if not overridden by the selected user.
Shows the Tx Tag requirements (Tag All, Tag PVID, Tag UVID, Untag All,
Untag PVID, Untag UVID) that a given user has on a port.
The field is empty if not overridden by the selected user.
If Tx Tag is overridden by the selected user and is set to Tag or Untag UVID,
then this field shows the VLAN ID the user wants to tag or untag on egress.
The field is empty if not overridden by the selected user.
Two users may have conflicting requirements to a port's configuration. For
instance, one user may require all frames to be tagged on egress while
another requires all frames to be untagged on egress.
Since both users cannot win, this gives rise to a conflict, which is solved in a
prioritized way. The Administrator has the least priority. Other software
modules are prioritized according to their position in the drop-down list: The
higher in the list, the higher priority.
If conflicts exist, it is displayed as Yes for the Combined user and the
offending software module.
The Combined user reflects what is actually configured in hardware.
Monitor | VLANs | Ports
VLANs | Ports
Monitor Pages - 251
Advertisement
Table of Contents
