Security | Switch | Privilege Levels
Item
The name identifying the privilege group. In most cases, a privilege level group consists of
a single module (for example: LACP, RSTP or QoS), but a few of them contain more than
one. The following description defines these privilege level groups in details:
•
System: Contact, Name, Location, Timezone, Daylight Saving Time, Log.
•
Security: Authentication, System Access Management, Port (contains Dot1x port, MAC
based and the MAC Address Limit), ACL, HTTPS, SSH, ARP Inspection, IP source
guard.
Group Name
•
IP: Everything except ping.
•
Port: Everything except VeriPHY.
•
Diagnostics: ping and VeriPHY.
•
Maintenance: CLI- System Reboot, System Restore Default, System Password,
Configuration Save, Configuration Load and Firmware Load. Web- Users, Privilege
Levels and everything in Maintenance.
•
Debug: Only present in CLI.
Every group has an authorization Privilege level for the following subgroups:
Privilege
configuration read-only, configuration/execute read-write, status/statistics read-only,
status/statistics read-write (for example, clearing of statistics). User Privilege should be
Levels
same or greater than the authorization Privilege level to have the access to that group.
56 - Configuration Pages
Configuration | Security| Switch | Privilege Levels
RocketLinx MP1204-XT User Guide: 2000644 Rev. A