Table of Contents
Advertisement
sFlow Configure Commands
sflow max-sampling-size
Description
Specifies the maximum number of bytes to transmit per flow sample.
Syntax
sflow max-sampling-size [ sampler <range_list> ] [ <14-200> ]
Name
Parameters
< range_list >
<200-1468>
sflow collector-port
Description
Collector UDP port
Syntax
sflow collector-port [ receiver <rcvr_idx_list> ] <collector_port>
Name
Parameter
collector_port
sflow sampling-rate
Specifies the statistical sampling rate. The sample rate is
specified as N to sample 1/Nth of the packets n the monitored
Description
flows. There are no restrictions on the value, but the switch will
adjust it to the closest possible sampling rate.
Syntax
sflow sampling-rate [ sampler <range_list> ] [ <1-4294967295> ]
Name
Parameters
< range_list >
<1-4294967295>
sflow timeout
Receiver timeout measured in seconds. The switch decrements the
timeout once per second, and as long as it is non-zero, the receiver
Description
receives samples. Once the timeout reaches 0, the receiver and all its
configuration is reset to defaults.
Syntax
sflow timeout [ receiver <range_list> ] <0-2147483647>
Name
Parameters
< range_list >
<0-2147483647>
342 - Command Line Interface (CLI)
Description
Sampler instance
packet byte
Description
<Collector Port : 1-65535> Port number
Description
Sampler instance
Sampling rate
Description
Sampler instance
Number of seconds.
RocketLinx MP1204-XT User Guide: 2000644 Rev. A
Advertisement
Table of Contents
