Loop Protection - Comtrol ROCKETLINX ES8509-XT User Manual

Configuration Using the Web Interface

Loop Protection

Loop protection prevents broadcast loops in Layer 2 switching configurations.
Loop Protection Page
Transmit Interval
Port
Loop Protection
Status
Apply
Reload
86 - Loop Protection
Loop protection mechanism detection packet transmitting interval
1 ~ 10 seconds (default is 1).
The port ID.
Enable/Disable loop protection mechanism on port.
The status of loop protection.
Click Apply to apply the settings.
Note: You must Save the settings
maintain these settings if the ES8509-XT is powered off.
Click the Reload button to reload loop protection information.
(Page 127), if you want to
RocketLinx ES8509-XT User Guide: 2000557 Rev. D