Table of Contents
Advertisement
QoS | Port DSCP
QoS | Port DSCP
This page allows you to configure the basic QoS Port DSCP Configuration settings for all switch ports.
Item
The Port column shows the list of ports for which you can configure DSCP ingress
Port
and egress settings.
In Ingress settings you can change ingress translation and classification settings
for individual ports.
Ingress
There are two configuration parameters available in Ingress:
•
•
Translate
To enable the Ingress Translation click the check box.
Classification for a port have 4 different values.
•
•
Classify
•
•
162 - Configuration Pages
Configuration | QoS | DSCP
Translate
Classify
Disable: No Ingress DSCP Classification.
DSCP=0: Classify if incoming (or translated if enabled) DSCP is 0.
Selected: Classify only selected DSCP for which classification is enabled as
specified in DSCP Translation window for the specific DSCP.
All: Classify all DSCP.
RocketLinx MP1204-XT User Guide: 2000644 Rev. A
Advertisement
Table of Contents
