Table of Contents
Advertisement
VCL | MAC-Based VLAN
The MAC-based VLAN entries can be configured here. This page allows for adding and deleting MAC-based
VLAN entries and assigning the entries to different ports. This page shows only static entries.
Item
Delete
MAC Address
VLAN ID
Port Members
Auto-refresh
RocketLinx MP1204-XT User Guide: 2000644 Rev. A
Configuration | VCL | MAC-Based VLAN
To delete a MAC-based VLAN entry, check this box and press save. The entry is
deleted in the stack.
Indicates the MAC address.
Indicates the VLAN ID.
A row of check boxes for each port is displayed for each MAC-based VLAN entry.
To include a port in a MAC-based VLAN, check the box. To remove or exclude
the port from the MAC-based VLAN, make sure the box is unchecked. By
default, no ports are members, and all boxes are unchecked.
Click the Add New Entry button to add a new MAC-based VLAN entry. An
empty row is added to the table, and the MAC-based VLAN entry can be
configured as needed. Any unicast MAC address can be configured for the MAC-
based VLAN entry. No broadcast or multicast MAC addresses are allowed.
Legal values for a VLAN ID are 1 through 4095.
The MAC-based VLAN entry is enabled when you click the Save button. A MAC-
based VLAN without any port members is deleted when you click Save.
The Delete button can be used to undo the addition of new MAC-based VLANs.
The maximum possible MAC-based VLAN entries are limited to 256.
Click to save changes.
Click to undo any changes made locally and revert to previously saved values.
Check this box to refresh the page automatically. Automatic refresh occurs
every 3 seconds.
Refreshes the displayed table.
Updates the table starting from the first entry in the MAC-based VLAN Table.
Updates the table, starting with the entry after the last entry currently
displayed.
VCL | MAC-Based VLAN
Configuration Pages - 149
Advertisement
Table of Contents
