Table of Contents
Advertisement
Security | Switch | Auth Method
This page allows you to configure how a user is authenticated when he logs into the MP1204-XT via one of the
management client interfaces.
Item
Client
The management client for which the configuration below applies.
Method can be set to one of the following values:
•
•
•
•
Methods
Methods that involve remote servers are timed out if the remote servers are off-line.
In this case, the next method is tried. Each method is tried from left to right and
continues until a method either approves or rejects a user. If a remote server is used
for primary authentication it is recommended to configure secondary authentication
as local. This enables the management client to login via the local user database if
none of the configured authentication servers are alive.
RocketLinx MP1204-XT User Guide: 2000644 Rev. A
Configuration | Security| Switch | Auth Method
no: Authentication is disabled and login is not possible.
local: Use the local user database on the switch for authentication.
radius: Use remote RADIUS server(s) for authentication.
tacacs+: Use remote TACACS+ server(s) for authentication.
Security | Switch | Auth Method
Configuration Pages - 57
Advertisement
Table of Contents
