Table of Contents
Advertisement
Configuration | GVRP Menu
The following pages are under the GVRP menu.
•
GVRP | Global Config
•
GVRP | Port Config
GVRP | Global Config
This page allows you to configure the basic GVRP Configuration settings for all switch ports.
Item
GVRP Protocol timers
Join-time
Leave-time
LeaveAll-time
Max number of VLANs
RocketLinx MP1204-XT User Guide: 2000644 Rev. A
on Page 173
on Page 174
Configuration | GVRP | Global config
Join-time is a value in the range 1-20 in the units of centi seconds, i.e. in units
of one hundredth of a second. The default is 20.
Leave-time is a value in the range 60-300 in the units of centi seconds, i.e. in
units of one hundredth of a second.The default is 60.
LeaveAll-time is a value in the range 1000-5000 in the units of centi seconds,
i.e. in units of one hundredth of a second. The default is 1000.
When GVRP is enabled a maximum number of VLANs supported by GVRP is
specified. By default this number is 20. This number can only be changed
when GVRP is turned off.
Configuration | GVRP Menu
Configuration Pages - 173
Advertisement
Table of Contents
