Table of Contents
Advertisement
Security | Switch | SNMP | Trap
Item
Trap Destination
IPv6 Address
Trap Authentication
Failure
Trap Link-up and
Link-down
Trap Inform Mode
Trap Inform
Timeout (seconds)
Trap Inform Retry
Times
Trap Probe Security
Engine ID
Trap Security
Engine ID
Trap Security Name
64 - Configuration Pages
Configuration | Security| Switch | SNMP | Trap Configuration
Indicates the SNMP trap destination IPv6 address. IPv6 address is in 128-bit
records represented as eight fields of up to four hexadecimal digits with a colon
separating each field (:).
For example, 'fe80::215:c5ff:fe03:4dc7'. The symbol '::' is a special syntax that can
be used as a shorthand way of representing multiple 16-bit groups of contiguous
zeros; but it can appear only once. It can also represent a legally valid IPv4
address. For example, '::192.1.2.34'.
Indicates that the SNMP entity is permitted to generate authentication failure
traps. Possible modes are:
•
Enabled: Enable SNMP trap authentication failure.
•
Disabled: Disable SNMP trap authentication failure.
Indicates the SNMP trap link-up and link-down mode operation:
•
Enabled: Enable SNMP trap link-up and link-down mode operation.
•
Disabled: Disable SNMP trap link-up and link-down mode operation.
Indicates the SNMP trap inform mode operation. Possible modes are:
•
Enabled: Enable SNMP trap inform mode operation.
•
Disabled: Disable SNMP trap inform mode operation.
Indicates the SNMP trap inform timeout. The allowed range is 0 to 2147.
Indicates the SNMP trap inform retry times. The allowed range is 0 to 255.
Indicates the SNMP trap probe security engine ID mode of operation. Possible
values are:
•
Enabled: Enable SNMP trap probe security engine ID mode of operation.
•
Disabled: Disable SNMP trap probe security engine ID mode of operation.
Indicates the SNMP trap security engine ID. SNMPv3 sends traps and informs
using USM for authentication and privacy. A unique engine ID for these traps and
informs is needed. When Trap Probe Security Engine ID is enabled, the ID is
probed automatically. Otherwise, the ID specified in this field is used. The string
must contain an even number (in hexadecimal format) with number of digits
between 10 and 64, but all-zeros and all-'F's are not allowed.
Indicates the SNMP trap security name. SNMPv3 traps and informs using USM
for authentication and privacy. A unique security name is needed when traps and
informs are enabled.
Click to add a new user.
RocketLinx MP1204-XT User Guide: 2000644 Rev. A
Advertisement
Table of Contents
