Table of Contents
Advertisement
Item
Specify the sender IP filter for this ACE.
•
Any: No sender IP filter is specified. (Sender IP Filter is don't-care.)
Sender IP
•
Host: Sender IP Filter is set to Host. Specify the sender IP address in the SIP Address
Filter
field that appears.
•
Network: Sender IP Filter is set to Network. Specify the sender IP address and sender IP
mask in the SIP Address and SIP Mask fields that appear.
Sender IP
When Host or Network is selected for the Sender IP Filter, you can enter a specific sender IP
Address
address in dotted decimal notation.
Sender IP
When Network is selected for the Sender IP Filter, you can enter a specific sender IP mask in
Mask
dotted decimal notation.
Specify the target IP filter for this specific ACE.
•
Any: No Target IP Filter is specified. (Target IP Filter is don't-care.)
Target IP
•
Host: Target IP Filter is set to Host. Specify the target IP address in the Target IP Address
Filter
field that appears.
•
Network: Target IP Filter is set to Network. Specify the target IP address and target IP
mask in the Target IP Address and Target IP Mask fields that appear.
Target IP
When Host or Network is selected for the Target IP Filter, you can enter a specific target IP
Address
address in dotted decimal notation.
Target IP
When Network is selected for the Target IP Filter, you can enter a specific target IP mask in
Mask
dotted decimal notation.
Specify whether frames can hit the action according to their sender hardware address field
(SHA) settings.
ARP Sender
•
0: ARP frames where SHA is not equal to the SMAC address.
MAC Match
•
1: ARP frames where SHA is equal to the SMAC address.
•
Any: Any value is allowed (don't-care).
Specify whether frames can hit the action according to their target hardware address field
(THA) settings.
RARP
•
0: RARP frames where THA is not equal to the target MAC address.
Target MAC
Match
•
1: RARP frames where THA is equal to the target MAC address.
•
Any: Any value is allowed (don't-care).
Specify whether frames can hit the action according to their ARP/RARP hardware address
length (HLN) and protocol address length (PLN) settings.
•
0: ARP/RARP frames where the HLN is not equal to Ethernet (0x06) or the (PLN) is not
IP/Ethernet
equal to IPv4 (0x04).
Length
•
1: ARP/RARP frames where the HLN is equal to Ethernet (0x06) and the (PLN) is
equal to IPv4 (0x04).
•
Any: Any value is allowed (don't-care).
Specify whether frames can hit the action according to their ARP/RARP hardware address
space (HRD) settings.
•
0: ARP/RARP frames where the HLD is not equal to Ethernet (1).
IP
•
1: ARP/RARP frames where the HLD is equal to Ethernet (1).
•
Any: Any value is allowed (don't-care).
RocketLinx MP1204-XT User Guide: 2000644 Rev. A
Configuration | Security | Network | ACL | Access Control List | ACE
Security | Network | ACL | Access Control List
Configuration (Continued)
Configuration Pages - 95
Advertisement
Table of Contents
