Table of Contents
Advertisement
Security | Network | ARP Inspection | Port Configuration
Security | Network | ARP Inspection | Port Configuration
This page provides ARP Inspection related configuration.
Item
Mode of ARP Inspection
Configuration
Port Mode
Configuration
102 - Configuration Pages
Configuration | Network | ARP Inspection | Port Configuration
Enable the Global ARP Inspection or disable the Global ARP Inspection.
Specify ARP Inspection is enabled on which ports. Only when both Global Mode
and Port Mode on a given port are enabled, ARP Inspection is enabled on this
given port. Possible modes are:
•
Enabled: Enable ARP Inspection operation.
•
Disabled: Disable ARP Inspection operation.
If you want to inspect the VLAN configuration, you have to enable the setting of
Check VLAN. The default setting of Check VLAN is disabled. When the setting
of Check VLAN is disabled, the log type of ARP Inspection refers to the port
setting. If Check VLAN is enabled, the log type of ARP Inspection refers to the
VLAN setting. Possible setting of Check VLAN are:
•
Enabled: Enable check VLAN operation.
•
Disabled: Disable check VLAN operation.
Only the Global Mode and Port Mode on a given port are enabled, and the setting
of Check VLAN is disabled, the log type of ARP Inspection refers to the port
setting. There are four log types and possible types are:
•
None: Log nothing.
•
Deny: Log denied entries.
•
Permit: Log permitted entries.
•
All: Log all entries.
Click to translate all dynamic entries to static entries.
RocketLinx MP1204-XT User Guide: 2000644 Rev. A
Advertisement
Table of Contents
